EASYGRES drill bit kits are the most economical solution for those users who need to drill holes of different diameters in all types of ceramic tiles.

EASYGRES are electroplated diamond drill bits, wet cutting, suitable for use with hammerless electric drills. The quality of the diamond used in the design and manufacture of EASYGRES drill bits allows drilling stoneware, porcelain stoneware, granite, marble and glass.

RUBI makes different product kits available to construction professionals, with configurations adapted to the most common situations.

For the smallest diameters (from Ø 6 to 12 mm), RUBI offers a practical EASYGRES kit composed of: one or several drill bits (depending on the model), the practical EASYGRES guide, the corresponding centering sleeves (depending on the number of drill bits contained in the kit ) and fixing adhesives. The EASYGRES guide allows you to make holes in both the floor and the wall, thanks to the functional design of its water tank that incorporates a flow regulator tap. The guide easily adheres to any surface, thanks to its renewable adhesive system.

In addition to these practical kits, RUBI also offers the EASYGRES PLUS kit composed of: 7 EASYGRES drill bits (Ø 20, 28, 35, 43, 50, 68 and 75 mm), a MULTIDRILL centering guide, a tank and hose assembly and a practical suitcase case.

Finally, and thinking about the most common use of this type of drill bits, there is the EASYGRES Ø 35 mm kit. This kit offers the possibility of acquiring the most used drill diameter (Ø35 mm) along with all the necessary accessories: MULTIDRILL guide and tank and hose assembly.

The average life of EASYGRES drill bits varies depending on the diameter. In EASYGRES from Ø 6 to 12 mm the average life is 10 holes and in EASYGRES from Ø 20 to 120 mm the average life is 25 holes. The average life of drill bits ALWAYS depends on the type of material, its thickness and correct cooling and use.

The drilling depth of EASYGRES drill bits is 25 mm.

EASYGRES drill bits have a side opening that improves the cooling of the drill bit and makes it easier to remove solid waste after each hole. Before drilling a new drilling, we must make sure that the drill bit is clean and free of any obstruction.

The recommended speed of use for EASYGRES drill bits is between 400 and 1000 rpm, depending on the material to be drilled. For a better finish and longer drill life, it is important to respect the appropriate rotation speed and apply moderate pressure while drilling.