Comes with:
DCN692 1st Fix Framing Nailer
DCN660 2nd Fix Finishing Nailer
2 x DCB184 5.0Ah XR Batteries
Multi-Voltage Charger
Tstak Mobile Storage Case
DCN692 Framing Nailer Features:
18V XR Li-Ion Two Speed Framing Nailer featuring brushless motor technology
Two speeds - or power levels - to optimise the nailer for firing all lengths of nails
Benefit from longer runtime, quicker readiness to fire, less recoil and more durability when firing short nails
Brushless motor technology offers the power to fire a 90mm Ring Shank nail in Soft Wood and 63mm into Hard Woods
The sequential operating mode allows for precision placement and the bump operating mode provides the user with production speed
Mechanical rather than gas operation offers consistent performance at temperature between -20 and 50 degrees Celsius and minimal cleaning/service requirements
Class leading vibration and sound figures, offer fantastic user protection
Versatile 30 - 34 degree magazine angle will accept most clipped head, and off centre round head paper tape or wire weld collated framing nails
Reversible belt/rafter hook provides increased portability and versatility on the job-site
Depths can be easily adjusted using the thumb wheel depth adjuster
Increased visibility and durability along with protection for work-surface from the non-mar contact-trip
Ergonomic tool design allows the nailer to fit easily between a 400mm centre stud
Gas free operation offers a significant saving in running costs
Tool free stall/jam clearance minimises user down time
Cordless design allows you to work without the inconvenience and safety risk of trailing leads
User can engage contact trip lock-off and prevent accidental dis-charge of fastener
Dry fire lockout ensures that the tool is protected from firing without nails in the magazine
DCN660 2nd Fix Nailer Features:
Latest generation 18V XR Li-Ion Brushless 16Ga nailer offers the cutting edge in nailing technology
Brushless motor offers runtime that cannot be beaten in a compact package
Compact, lightweight and ergonomic design makes the tool easy and comfortable to use but durable enough for worksite environment
Mechanical rather than gas operation offers low running costs and consistent performance at low temperatures
Sequential mode allows for precision placement and the bump operating mode provides the user with production speed of up to 4 nails per second
Depth of drive can be easily adjusted using the thumb wheel depth adjuster
Tool free stall / jam clearance minimises down time
Trigger and contact trip lock-off and prevent accidental dis-charge of fastener
DCN692 Framing Nailer Specification:
Voltage: 18 V
Nail Diameter: 2.8 - 3.3 mm
Magazine angle: 30 - 34 °
Magazine loading: Rear-load
Nail Length: 50 - 90 mm
Magazine capacity: Up to 55 Nails
Trigger Type: Bump & Sequential
Length: 345 mm
Width: 125 mm
Height: 338 mm
Weight: 4.1 kg
Nailer Operating Mode: Selective
Integrated Belt Hook: Yes
Jam Clearing: Yes
Impact energy: 105 J
Temperature Range: -20 to 50°C
Fault indicator: Yes
DCN660 2nd Fix Nailer Specification:
Voltage: 18 V
Nail Diameter: 1.6 (16Ga) mm
Magazine angle: 20 °
Magazine loading: Rear
Nail Length: 32 - 63 mm
Magazine capacity: 110 Nails
Trigger Type: Bump & Sequential
Length: 310 mm
Width: 95 mm
Height: 305 mm
Weight: 2.65 kg
Nailer Operating Mode: Bump and Sequential
Integrated Belt Hook: Yes
Jam Clearing: Tool free
Impact energy: 48 J
Temperature Range: -20 to 50°C
Fault indicator: Yes
Noise LPa 1sd / Uncertainty: 81 / 3 dB
Noise LWa 1sd / Uncertainty: 92 / 3 dB
Vibration / Uncertainty: <2.5 / 1.5 m/s²